SBC4-100-292 - Aaeon SBC4-100-292 CPU Board. Half-size 486 All-in-One CPU Card with...
Request Quote
For Price
- Part Number:
- SBC4-100-292
- Model Number:
- SBC4-100-292
- Make:
- AAEON
- Lead Time:
- Available
- Qty In Stock:
- Available
Aaeon SBC4-100-292 CPU Board. Half-size 486 All-in-One CPU Card with Cache Simple Type: CPU Board
The SBC-410 is an all-in-one CPU card that supports L2 cache sizes from 128 KB to 512 KB (32 KB x 8, 64 KB x 8, or 128 KB x 8). This CPU card uses the M1489/M1487 chipsets, which accept Intel, AMD, Cyrix, or other compatible 486-based CPUs. The SBC-410 is fully PC/AT compatible, so your software will run without modifications. On-board features include two high-speed serial ports (RS-232 and RS-232/422/485) with 16C550 UARTs, one bi-directional parallel port, and a floppy drive controller. If program execution is halted by a program bug or EMI, the board's 15-stage watchdog timer can automatically reset the CPU or generate an interrupt. This ensures reliability in unmanned or stand-alone systems. The SBC-410 is built with two high speed local bus Enhanced IDE controllers. This controller supports (through ATA PIO) mode 3 and mode 4 hard disks, which enable data transfer rates of over 11 MB/second. It connects up to four IDE devices, including large hard disks, CD-ROM drives, tape backup drives, etc. The built-in enhanced IDE controller provides a 4-layer 32-bit posted write-buffer and a 4-layer 32-bit read-prefetch-buffer to boost IDE performance. The SBC-410 supports 5V EDO DRAM. It also provides two 72-pin SIMM (Single In-line Memory Module) sockets for on-board DRAM. This gives you the flexibility to configure your system memory from 1 ~ 64 MB using the most economical combination of SIMMs. The SBC-410 also features power management to minimize power consumption. It uses CMOS components and complies with the "Green Function" standard. If you need any additional functions, you can add industry-standard PC/104 expansion modules. We provide numerous PC/104 modules to meet your system requirements.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- "Green" function, supports power management
- 32 to 140oF (0 to 60oC) operating temperature
- Accepts any Intel, AMD, Cyrix, or other compatible processor
- Built-in 128 KB secondary cache, up to 512 KB
- Built-in IDE (AT bus) hard disk drive interface, floppy drive controller
- Connectors for PC/104 module expansion
- Half-size ISA bus CPU card, fully 486SX/DX/DX2/DX4/5x86/Pentium, Over Drive compatible
- IDE HDD auto-detection
- On-board keyboard connector and/or PS/2 mouse
- One bi-directional parallel port
- One RS-232 and one RS-232/422/485 selectable serial port; uses 16C550 UARTs with 16-byte FIFO
- Single +5V power supply
- Up to 64 MB of on-board DRAM; supports 5V EDO DRAM
- Watchdog timer, software programmable from 2 to 32 seconds (15 steps, 2 seconds per step)
Specifications
- Bi-directional parallel port: SPP/EPP/ECP standards
- BIOS: AMI Flash WinBIOS
- Board size: 7.3"(L) x 4.8"(W) (185 mm x 122 mm)
- Board weight: 1.2 lbs (0.5 Kg)
- Bus Interface: ISA (PC/AT) bus
- Bus speed: 8Mhz
- Chipset: ALI 1489/1487
- CPU: Intel: 486SX/DX/DX2/DX4/Pentium Over Drive; AMD: AM486DX/DX2/DX4/5x86; IBM/SGS/Cyrix: Cx486DX/DX2/M7/5x86; TI: 486DX2/DX4
- Data Bus: 32 bit
- DMA channels: 7
- Enhanced IDE HDD interface: Supports up to four enhanced IDE (ATA-2 bus) large hard disk drives or other enhanced IDE devices. Supports mode 3 and mode 4 hard disks (minimum data transfer rate of 11.1 MB/sec).
- Floppy disk drive interface: Supports up to two floppy disk rives, 5.25" (360 KB and 1.2 MB) and/or 3.5" (720 KB, 1.44 and 2.88 MB).
- Green Function: Yes
- Interrupt levels: 15
- IRQ SELECTION FOR COM PORTS:: COMA: Supports COM 1/2/3/4 & address is selectable; COMB: Supports COM 1/2/3/4 & address is selectable;
- Keyboard connector: A 6-pin mini DIN keyboard connector is located on the mounting bracket for easy access. An on-board keyboard 5-pin header connector is also available.
- L2 Cache memory: On-board 128 KB, up to 512 KB (DIP package)
- Max. power requirements: +5V @ 2.5A
- Operating temperature: 32 to 140oF (0 to 60oC); must use a cooling fan when using a DX4-100 CPU or above
- PC/104: 104-pin connector for a 16-bit bus
- Power supply voltage: Single +5 V (4.75 V to 5.25 V)
- Processing ability: 32 bit
- PS/2 Mouse connector: Shared with keyboard connector.
- RAM memory: 1MB to 65MB, two 72-pin sockets
- Serial ports: One serial RS-232 port and one serial RS-232/RS-422/RS-485 port, jumper selectable. Both with 16C550 UARTs with16-byte FIFO buffer.
- Shadow RAM memory: Supports system and video BIOS up to 256 KB in 32 KB blocks
- System performance: 325 MHz in 80486DX4-100 (Landmark V2.0)
- Watchdog timer: The time interval is software selectable from 2 to 32 seconds (15 steps, 2 seconds per step). Can generate a system reset or IRQ15.
Applications
- None Available
Aliases
- None Available