AAEON Industrial Partner

AAEON SBC-410 CPU board. Half size all-in-One with Cache, ISA bus, fully 486SX/DX/DX2/DX4/5x86/Pentium Over Drive compatible Simple Type: CPU Board

The SBC-410 is an all-in-one CPU card that supports L2 cache sizes from 128 KB to 512 KB (32 KB x 8, 64 KB x 8, or 128 KB x8). This CPU card uses the M1489/M1487 chipsets, which accept Intel, AMD, Cyrix, or other compatible 486-based CPUs. The SBC-410 is fully PC/AT compatible, so your software will run without modifications. On-board features include two high-speed serial ports (RS-232 and RS-232/422/485) with 16C550 UARTs, one bi-directional parallel port, and a floppy drive controller. If program execution is halted by a program bug or EMI, the board's 15-stage watchdog timer can automatically reset the CPU or generate an interrupt. This ensures reliability in unmanned or stand-alone systems. The SBC-410 is built with two high speed local bus Enhanced IDE controllers. This controller supports (through ATA PIO) mode 3 and mode 4 hard disks, which enable data transfer rates of over 11 MB/second. It connects up to four IDE devices, including large hard disks, CD-ROM drives, tape backup drives, etc. The built-in enhanced IDE controller provides a 4-layer 32-bit posted write-buffer and a 4-layer 32-bit read-prefetch-buffer to boost IDE performance. The SBC-410 supports 5V EDO DRAM. It also provides two 72-pin SIMM (Single In-line Memory Module) sockets for on-board DRAM. This gives you the flexibility to configure your system memory from 1~64 MB using the most economical combination of SIMMs. The SBC-410 also features power management to minimize power consumption. It uses CMOS components and complies with the"Green Function" standard. If you need any additional functions, you can add industry-standard PC/104 expansion modules. We provide numerous PC/104 modules to meet your system requirements.