SBC-598 - AAEON SBC-598 CPU Boards-Full-Size PCI/ISA Pentium CPU Card with VGA,...
Request Quote
For Price
- Part Number:
- SBC-598
- Model Number:
- SBC-598
- Make:
- AAEON
- Lead Time:
- Available
- Qty In Stock:
- Available
AAEON SBC-598 CPU Boards-Full-Size PCI/ISA Pentium CPU Card with VGA, High Drive, & SSD Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- High Drive design to enhance the ISA driving capacity
- SiS5598 VGA controller onboard
- Supports DiskOnChip (SSD) up to 288MB
- Supports Intel Pentium MMX 166~233MHz CPUs
Specifications
- Battery: Lithium battery for data retention
- BIOS: Award 128KB FLASH BIOS
- Board size: 13.3"(L) x 4.8"(W) (338mm x 122mm)
- Bus interface: PCI/ISA bus. PICMG 2.0 standard
- Chipset: SiS5598 I/O Chipset ITE IT8661F. Fully 16-bit I/O decoded
- CPU: Intel Pentium MMX 166~233MHz, AMD-K6-2 233~300MHz, Cyrix 6X86MX PR166~200GP/M2-300MHz, and IDT Winchip C6 200~240MHz
- CPU type: Intel Socket 7
- CRT Interface: Chipset SiS 5598
- Display memory: UMA supports up to 4MB display memory
- Display type: Supports non-interlaced CRT displays
- DMA: 7 DMA channels (8237 equivalent)
- Enhanced IDE: Supports four IDE devices. Supports Ultra DMA/33 mode with data transfer rate 33MB/sec.
- FDD interface: Supports two floppy disk drives, 5.25" (360KB and 1.2MB) and/or 3.5" (720KB, 1.44MB, and 2.88MB)
- Interrupt: 15 interrupt levels (8259 equivalent)
- IR interface: Supports one IrDA Tx/Rx header
- ISA driving capacity: Built-in Address/Data buffer supports driving capacity up to 64mA
- KB/Mouse connector: 6-pin mini-DIN connector supports PC/AT keyboard and PS/2 mouse. Additional 5-pin header supports PC/AT keyboard for IPC applications
- L2 Cache: Onboard 512KB pipeline burst level two Cache
- Memory: Onboard four 72-pin SIMM and one 168-pin DIMM sockets support up to 256Mbytes Fast Page or EDO DRAM
- Operating temperature: 32o to 140oF (0o to 60oC)
- Parallel port: One bi-directional parallel port. Supports SPP, ECP, and EPP modes
- Power management: I/O peripheral devices support power saving and doze/standby/suspend modes. APM 1.2 compliant
- Power supply Voltage: +5V (4.75V to 5.25V), +12V (11.4V to 12.6V)
- Processor: Intel Pentium MMX
- Resolution: Up to 1024x768@16M colors
- Serial port: Two RS-232 serial ports. Ports can be configured as COM1, COM2, COM3, COM4, or disabled individually. (16C550 equivalent)
- Typical power requirement: +5V @ 3A
- USB connectors: One 5 x 2 header onboard supports dual USB ports
- Watchdog timer: Can generate a system reset, IRQ15, or NMI. Software selectable time-out interval (2 sec. ~ 128 min., 1 sec./step)
- Weight: 1.2 lb. (0.5 kg)
Applications
- None Available
Aliases
- None Available