AAEON Industrial Partner

SBC-670S - AAEON SBC-670S CPU Boards-Full-size PCI/ISA Pentium Pro CPU Card with...

larger image

Request Quote
For Price
Part Number:
SBC-670S
Model Number:
SBC-670S
Make:
AAEON
Lead Time:
Available
Qty In Stock:
Available

AAEON SBC-670S CPU Boards-Full-size PCI/ISA Pentium Pro CPU Card with Ultra-Wide SCSI Interface Simple Type: CPU Board

The SBC-670S is an all-in-one, single board Pentium Pro computer with an on-board, high performance Ultra-wide SCSI interface. It packs all the functions of an industrial computer on a single, full-sized card. The SBC-670S is fully PC/AT compatible, thus your software will run without modifications. The Ultra-wide SCSI interface speeds up the transfer rate to 40 MB/ sec and is capable of connecting 15 devices. An 8-bit PCI SCSI-II interface is available as an option. Other on-board features include a PCI Enhanced IDE interface, two RS-232 ports with 16C550 UARTs, one bi-directional parallel port and a floppy controller. The SBC-670S' PCI Enhanced IDE interface support (through ATA PIO) mode 3 and mode 4 hard disks, enabling data transfer rates in excess of 11 MB/sec. Up to four IDE devices can be connected, including hard disks, CD-ROM drives, tape backup drives and other IDE devices. If program execution is halted by a program bug or EMI, the watchdog timer will automatically reset the CPU or generate an interrupt. This ensures reliability in unmanned or standalone systems. The SBC-670S supports BEDO, EDO DRAM or Fast page DRAM for system memory. It provides four 72-pin SIMM (Single In Line Memory Module) sockets in two banks giving you the flexibility to configure your system from 8 MB to 128 MB in the most economical way.

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 32-bit PCI-bus, PICMG 2.0 standard
  • 9-bit GPIO interface
  • and capable of connecting 15 devices
  • Built-in Ultra wide SCSI interface with 40MB/sec high transfer speed
  • disks, CD-ROM, tape backup, etc.)
  • Fast PCI enhanced IDE controller supports four IDE drives(large hard
  • FIFO)
  • Intel 440 FX chipset
  • Intel Pentium Pro CPU 150~200MHZ, Socket 8 ZIF socket
  • On-board keyboard and PS/2 mouse connector
  • One enhanced bi-directional parallel port supporting SPP/EPP/ECP.
  • PnP I/O address & IRQ selection
  • Support two USB ports
  • Supports up to 128MB BEDO, EDO or Fast Page DRAM
  • Two high-speed serial RS-232 ports (16C550 UARTs with 16-byte

Specifications

    General
  • BIOS: AMI Flash BIOS supports DMI, PnP, Green
  • Board size: 13.3" (L) x 4.8"(W) (338mm x 122mm)
  • Board weight: 1.2 lbs (0.5Kg)
  • Bus interface: PCI/ISA bus, PICMG 2.0 standard
  • Bus speed: ISA: 8~12 MHZ
  • CPU: Intel Pentium Pro CPU 150~200MHZ
  • Data bus: 64-bit
  • DMA channels: 7
  • Floppy disk drive interface: Supports up to two floppy disk drives, 5.25"
  • GPIO port: 9-bit GPIO port supported
  • Interrupt levels: 15
  • Keyboard/ mouse connector: 6-pin mini DIN connector supports standard
  • Max. power requirement: +5V @ 12A
  • Operating temperature: 32° F to 140° F (0 to 60° C)
  • Parallel port: One bi-directional parallel port. Supports
  • PCI Enhanced IDE interface: Supports up to four IDE devices including
  • PCI SCSI-II interface: 8-bit SCSI-II interface
  • PCI Ultra-wide SCSI interface: 16-bit Ultra-wide SCSI interface (40MB/sec)
  • Power supply voltage: +5V (4.75V to 5.25V), +12V power supply
  • Processing ability: 64-bit
  • Processor: Intel Pentium Pro
  • RAM memory: 8 MB to 128 MB in two banks of 72-pin SIMM
  • Serial ports: Two RS-232 ports (IrDA Tx/Rx header as an
  • Shadow RAM memory: Supports system and video BIOS shadow
  • Watchdog timer: The timeout interval is software selectable. (1

 

Applications

  • None Available

Aliases

  • None Available